BZBGEAR Showcases a Complete Camera-to-Fiber Broadcast Chain at IBC2026

SACRAMENTO, CA, September 11, 2026 /24-7PressRelease/ — Most stands at IBC demonstrate one link in the chain and leave the rest to the imagination. BZBGEAR is wiring all four together: award-winning ADAMO auto-tracking PTZ cameras in NDI|HX 3 and Dante AV-H versions, an all-in-one portable production switcher, a broadcast encoder-decoder-recorder, and single-mode fiber transport reaching 10 kilometers at zero-frame latency. Everything on the stand runs as one working system for all four days of the show.

Acquire — ADAMO PTZ Cameras in NDI|HX 3 and Dante AV-H
BZBGEAR brings its award-winning ADAMO camera line to Amsterdam in the two IP versions a broadcast facility is most likely to specify.

The BG-ADAMO-4KND (NDI|HX 3) and BG-ADAMO-4KDA (Dante AV-H) output up to 4K@60Hz over HDMI 2.0 and 12G-SDI, alongside USB and IP, with 12X or 25X optical zoom. AI-powered auto-tracking runs in Presenter and Zone modes for hands-free operation, integrated red/green LED tally lights are visible from any angle, and an onboard microSD writer records and stores up to 1 TB of 4K video — an iso record without racking a second device. Data, power, and control travel over a single category cable.

Beside them, the BG-ADAMO-JRND and BG-ADAMO-JRDA deliver the same control workflow and single-cable install at 1080p@60Hz, with 12X, 20X, and 30X optical zoom options. The pairing is the point: a 4K hero angle, HD coverage for the rest of the room, and one control surface across both.

Produce — BG-Commander-UltraX
The BG-Commander-UltraX collapses the flypack into a single portable unit: an all-in-one 4K production switcher and PTZ joystick controller with onboard recording. Four HDMI inputs accept sources up to 4K@30Hz and feed separate program and monitor outputs, with a 7-inch touchscreen, a 4D control joystick, a step-less knob, and a sliding T-bar on the surface.

Built-in chroma key, picture-in-picture, logo overlay, and a full transition set handle production in the box. A USB-C webcam output drops the program feed straight into any streaming or conferencing platform as a virtual camera, and the unit records directly to a USB drive or SD card with no PC in the signal path. Camera control is over ONVIF 2.8 and VISCA over IP.

Encode — BG-STREAM-DE
The BG-STREAM-DE is a one-channel SDI/HDMI encoder, decoder, and recorder built for facilities standardizing on IP transport without rebuilding the plant.

It accepts SDI or HDMI in and encodes H.265 or H.264 at up to 1080p@60Hz, with output to 3840x2160p@60Hz. Both SDI and HDMI loop-through are provided, so the local feed survives while the signal is being contributed. Transport options cover SRT, RTMP, HLS, RTSP over HTTP/TCP/UDP, and TS over UDP in unicast or multicast, with NDI and Dante AV-H available under separate license. Audio embed and de-embed run over 3.5 mm connectors, and USB 3.0 recording to MP4, TS, or MOV provides a safety copy without a second box.

Transport — BG-IPGEAR-XTREME-F
The BG-IPGEAR-XTREME-F is where copper runs out of road. The point-to-point transmitter and receiver pair carries 8K@60Hz 4:4:4 with DSC 1.2a, uncompressed 4K@60Hz 4:4:4, and visually lossless 4K@144Hz 4:4:4 across single-mode fiber to 10 kilometers (6.25 miles) — at zero-frame latency, with 48Gbps of video bandwidth (FRL 6) and HDCP 2.3.

Full-duplex RS-232 at 115,200bps, bi-directional wideband IR, CEC pass-through, 1G Ethernet pass-through, and USB 3.1 Gen1/Gen2 KVM all ride the same fiber. Stadium to truck, studio to master control, building to building — without the ground loops and EMI that come with running copper between structures.

“Every broadcaster we talk to is solving the same problem from four different directions at once — how to acquire it, how to cut it, how to get it on the network, and how to move it across a campus or a city,” said Eugene Bocharov, CEO of BZBGEAR. “Showing one box at a time doesn’t answer that. So this year we’re bringing the whole chain to Hall 11 and running it end to end, and our engineers will be standing next to it for four days. Bring us the path that won’t hold and we’ll work it out on the stand.”
— Eugene Bocharov, CEO of BZBGEAR

Event Details
IBC2026 Hall 11, Stand 11.A26 — RAI Amsterdam, the Netherlands September 11–14, 2026

Exhibition hours: Friday, 10:30–18:00; Saturday and Sunday, 09:30–18:00; Monday, 09:30–16:00.

BZBGEAR engineers are on Stand 11.A26 every day of the show, and the full chain runs continuously. Attendees are encouraged to bring a system drawing, a bill of materials, or the distances and bandwidth figures for a build in progress — the stand is set up for working technical conversations, not product walk-throughs.

For More Information
To book a meeting at Stand 11.A26 or learn more about the BZBGEAR lineup, visit bzbgear.com.

For inquiries, contact BZBGEAR:
Phone: 1(888)499-9906
Hours: Mon–Fri, 6:00AM – 5:00PM PST
Live Chat: bzbgear.com

About BZBGEAR

Founded in 2019, BZBGEAR is a global manufacturer of professional AV and broadcasting solutions headquartered in Sacramento, California. With a relentless focus on design, user experience, and lifetime customer support, BZBGEAR has rapidly become a number one choice for integrators, broadcasters, and organizations worldwide. From PTZ cameras and video distribution to signal management and control systems, BZBGEAR delivers end-to-end solutions built to perform.

—
For the original version of this press release, please visit 24-7PressRelease.com here